Configuring The Fax Address Format; Table 14. Fax Address Format Window Access - eCopy imageFORMULA ScanFront 220e Installation And Setup Manual

Configuring the fax address format

For fax connectors, you must define the fax address format required by your fax server
application or Internet fax service. A sample format is shown below:
Recipient Name
Prefix
Name Separator
To configure the fax address format:
You configure the fax address format in the Fax Address Format window. The following table
shows the location of the window for each fax connector:
Connector
Fax via Microsoft
Exchange
Fax via Lotus Notes
Fax via SMTP
Fax Prefix
Fax Address Format window access
TABLE 14.
Window access
From the connector Wizard or on the Fax Format tab of the Fax via Exchange
Properties window.
On the Fax Format tab in the connector's Properties window.
From the connector Wizard or on the Fax Format tab of the Fax via SMTP
Properties window.
®
eCopy ShareScan Installation and Setup Guide
Fax Number
Cover Page Attached
|
73
Suffix