eCopy imageFORMULA ScanFront 220e Installation And Setup Manual page 37

To add an eCopy-enabled device to the Services Manager:
Make sure that the device is running.
1
Go to the Administration console.
2
In the console tree, right-click Devices and then select Add a new device.
3
The Add Device window lists all available ScanFront devices. The window displays IP
Address information, the name of the device, the Client software version, the Services
Manager that is currently managing the device, and the domain.
If a device that you want to add does not appear in the list of available devices, click
4
Refresh.
Select the device or devices that you want to license and then click OK.
5
When the system prompts you to confirm the device that you want to add to the device
6
list, click Yes.
The system displays the product key information.
®
eCopy ShareScan Installation and Setup Guide
|
29