Configuring Scanner Settings; Table 19. Services: Scanner Settings Tab - eCopy ShareScan 4.2 Installation And Setup Manual

|
90 Reference: Common configuration information for connectors

Configuring Scanner Settings

The Scanner Settings tab enables you to attach default scanner settings to a connector profile. For
example, assume that a user always scans to Legal size paper with the scaling option set to 90%.
You can specify the settings in a profile so that the user at the device does not have to change
them.
If the device does not support a setting that you specify in the profile, the connector uses the
device's default settings.
To configure the default Scanner Settings:
In the console tree, select <connector_name> > Services and then click the Scanner
1
Settings tab.
Specify the default settings (see Table 19).
2
Click Save, select or specify the profile name, and then click Save.
3
Setting
Enable Scanner
Settings
Input Paper Size
Output Paper Size
Scaling
Resolution
Two-Sided
Color Depth (Pixel)

TABLE 19. Services: Scanner Settings tab

Description
Activates the scanner settings for the profile.
Paper sizes currently supported by the Services Manager. The default setting is "Use
Default", which enables the profile to use the device's default setting for this option.
Paper sizes currently supported by the Services Manager. The default setting is "Use
Default", which enables the profile to use the device's default setting for this option.
Available values between 20 and 100 percent.
Supported resolutions between 100 and 600 dpi.
Standard options, for example: single-sided, double-sided (book type) and double-
sided (calendar type).
Supported color types.