Configuring connector profiles to use address books
After creating and enabling address books, you can configure connector profiles to use them.
To configure connector profiles to use address books:
In the console tree, select your e-mail or fax connector, select Properties, and then click
1
the Local Address Book or Address Books tab.
Under Local Address Book or Address Book (for Lotus Notes connectors), click
2
Choose.
The Data Link Properties window opens.
Select the Provider tab and then select Microsoft OLE DB Provider for SQL Server.
3
Select the Connection tab and then specify your connection settings (see Table 17).
4
Click OK to close the window.
5
To verify that you can manually add an entry to the address book, click Add, enter user
6
information in the Add a Contact window, and then click Add.
If the address book is not enabled, select Enable.
7
Click Save, select or specify the profile name, and then click Save.
8
TABLE 17. Data Link Properties window: Connection tab
Step
Select or enter a
server name.
Enter information to
log on to the server.
Select the database
on the server.
Option
Use a specific user name
and password
Allow saving password
Test Connection
®
eCopy ShareScan
Installation and Setup Guide
Description
The name of your server.
User name: sa
Password: The password specified when you installed
SQL Express.
Required for correct configuration of the address book.
The address book that you want the connector to use.
Tests the connection.
|
79