eCopy imageFORMULA ScanFront 220e Installation And Setup Manual page 82

|
74 Reference: Common configuration information for connectors
Open the Fax Address Format window..
1
Refer to the documentation for your fax server application to obtain the correct format for
2
fax addresses.
Important!
Start building the address by adding components. For example, to include a prefix, select
3
Prefix from the list on the left and then click Add.
To change the order of the fax address components, select a component and then click
4
Move Up or Move Down.
For each component, perform the following tasks:
5
Select the Value field (for example, Fax Prefix Value).
■
Click Modify.
■
The Modify Value window opens.
Enter the appropriate prefix value.
■
Click OK.
■
The completed string appears in the Fax Address Format window.
When you finish building the fax address, click OK to close the window.
6
Since fax application vendors change these formatting schemes frequently, make sure
you obtain the current format.