Table of Contents
Advertisement
Setting up Scan to eCopy Desktop with Express functions
There is no separate Express tab for the Scan to eCopy Desktop Connector. The following
procedure enables you to configure Scan to eCopy Desktop to use Express functions.
To configure Scan to eCopy Desktop to use Express:
In the console tree, select System Information > Properties and then select the Session
1
Logon tab.
Configure Session Logon (see page 42).
2
In the console tree, select Scan to Desktop > Properties and then select the Configure
3
tab.
You can create an Express connector profile for a scan inbox or for a destination folder.
4
To create an Express connector profile for a scan inbox:
Select Scan Inbox/Home Folder Settings and then click the Properties button.
■
The Scan to Desktop Properties window opens.
Configure and test the Environment Settings.
■
Select the General Settings tab and then select Scan to Self as the Recipient Type.
■
Authenticate Users is selected automatically.
Click OK to return to the Configure tab.
■
To create an Express connector profile for a destination folder:
Select Destination Settings and then click the Properties button.
■
The Scan to Desktop Properties window opens.
Select a destination folder and make sure that Enable subfolder navigation is not
■
selected.
Select one of the following user authentication options: None, Runtime credentials
■
from Scan to Desktop, Service account from Scan to Desktop.
These options do not require the user to provide credentials at the device.
Test the credentials and then click OK to return to the Configure tab.
■
Click Save, select or specify the profile name, and then click Save.
5
®
eCopy ShareScan
Installation and Setup Guide
|
69
Advertisement
Table of Contents
