Table of Contents
Advertisement
TABLE 20. Canon ScanFront supported scanner settings (continued)
Option
Settings
Skip Blank Page
Yes
No
Blank Page
1-100
Sensitivity
Sharpness
0-100 (by 10)
Color Dropout
None
Red Drop-Out, Green Drop-Out,
Blue Drop-Out, Red Enhance,
Green Enhance, Blue Enhance
Remove Bleed
Yes
Thru
No
Remove Bleed
0-100 (by 10)
Thru Level
Double-Feed
None
Detection
Ultrasonic sensors (SF-220eP only)
Output Paper
Mixed Originals, Letter, Legal, A4,
Size
A5, A6, B5, B6, Statement
®
eCopy ShareScan
Installation and Setup Guide
Comments/Description
During scanning, the device analyzes the content
of each page based on the Blank Page Sensitivity
value. If it determines that the page is blank, the
page is not included in the scanned document that
is sent to the ShareScan Services Manager.
If the Skip Blank Page option is set to "Yes", this
option is enabled. Use the slider option to specify
the sensitivity level. The default is "90".
If you specify a value that is too low, pages with
text may be treated as blank pages and will not be
scanned.
If you specify a value that is too high, blank pages
may be scanned.
The "drop-out" values leave out the specified
color during scanning. The "enhance" values
emphasize the specified color.
Affects the scanned image only when the Color
Depth setting is "B&W" or "Grayscale". The
settings have no effect when the Color Depth
setting is "Color".
Keeps the images on the reverse side of a thin
original document from appearing on the scanned
image.
Adjust the level to match the type of document.
Ultrasonic sensors: Enables the scanner to
■
detect by ultrasonic sensors when two or more
documents are fed together. The scanner
stops feeding when it detects a double feed.
This method is effective when documents
overlap by 1.97" (50mm) or more.
|
87
Advertisement
Table of Contents
