Table of Contents
Advertisement
TABLE 31. Wizard settings: SMTP using LDAP (continued)
Wizard Window
Field
User Logon
None
Settings
Generic e-
mail
User modify
LDAP
Windows
domain
Novell tree
Fax Address
Cover Page /
Format
No Cover
(For Fax via SMTP
Page
using LDAP only.)
Format
Settings
Summary
eCopy ShareScan
Description
Sends the user at the device directly to the Send screen without
displaying the Logon screen. If you select this option, you must specify
a generic e-mail address or select the User modify option, or select
both.
A generic e-mail address that is used as the sender account for all e-
mail.
The user at the device can modify the sender's e-mail address.
Requires the user at the device to enter the user name and password
specified for the LDAP server.
Enables users at the device to use their Windows logon information,
via the SAMAccountName attribute, to log on.
The Domain field specifies the Windows domain name, populated
from the Account Settings window. This is required if you select the
Windows option.
Available only if you select Active Directory as the server type.
The Novell tree. This is required if you select the Novell option.
Available only if you select eDirectory as the server type.
Displays the fax format that you define in the Fax Address Format
window.
Opens the Fax Address Format window where you define the fax
address format required by your fax server application or Internet fax
service (see page 73).
Refer to the documentation for your fax application to obtain the
correct format for the fax address.
Since fax application vendors change these formatting schemes
frequently, make certain you obtain the current format.
Enables you to review your settings. Use the Back button if you need to
change any settings. Use the Finish button to apply your settings to the
connector profile.
®
Installation and Setup Guide
|
117
Advertisement
Table of Contents
