Table of Contents
Advertisement
The Wizard prompts you to enter information based on your choice of environment settings. See
the following tables for descriptions of the information required for each field:
Windows Server Account window: see Table 24, Exchange Properties: Basic Settings
■
tab.
This window is available only if you select Exchange 5.5 as your server type.
Windows Active Directory Server Account window: see Table 24, Exchange Properties:
■
Basic Settings tab.
Exchange Server window: see Table 25, Exchange Properties: Advanced Account
■
Settings.
This window is available only if you select HTTP/HTTPS as your connection protocol.
Resource Forest window: see Table 28, Exchange Properties: Advanced Settings tab.
■
This window is available only if you select Multiple Forests as your environment.
Fax Format window: see Table 27, Exchange Properties: Fax Format Settings.
■
This window is available only if you are configuring the eCopy Connector for Fax via
Microsoft Exchange. It enables you to specify the format of the fax addresses used by your
server.
Exchange Connectors Properties Settings
The Properties window enables administrators who are more familiar with Exchange server
environments to fine-tune the settings without relying on the Wizard. eCopy recommends that
you use the Wizard to initially configure a connector profile.
The Properties settings that are available depend on the connection protocols supported by your
environment. Although the window opens to the Basic settings tab, you should verify that the
correct connection protocols are displayed on the Advanced tab before specifying the settings on
the other tabs. If you specify your settings and then change the protocol, the system prompts you
to re-enter the user credentials on the Basic Settings tab.
®
eCopy ShareScan
Installation and Setup Guide
|
97
Advertisement
Table of Contents
