Configuring The Activity Logging Function - eCopy imageFORMULA ScanFront 220e Installation And Setup Manual

Configuring the Activity Logging function

When the Activity Logging function is enabled for a device, the Services Manager generates a log
file. The general format for each record in the log file is:
<Date>|<Time>|<Connector Label>|<Number of Pages in Document>|<Connector-
Specific Fields>|<SUCCESS/FAILURE>|<Device Name>
If you select the Extended Fields function, the log file includes the preceding fields and may
include the following fields:
<Document Size>|<DOC SENT>|<DOC TRACKED>|<USERNAME>|<DOMAIN>
If a user sends a scanned document to multiple recipients, each name is separated with a
semicolon.
To configure the Activity Logging function:
In the console tree, select Devices > <device_name> > Activity Tracking.
1
Select the Activity Logging tab and then select Enable.
2
Specify the settings (see Table 46).
3
Click Save.
4
®
eCopy ShareScan Installation and Setup Guide
|
147