Table of Contents
Advertisement
To configure the eCopy Connector for Fax via Lotus Notes properties:
In the console tree, select Fax via Lotus Notes > Properties.
1
Select the Display tab and then specify the settings (see Table 9).
2
Select the Configure tab and then specify the settings(see Table 30).
3
Select the Fax Format tab, which displays samples of the current fax address format, and
4
then specify the Fax format (see page 73).
If your fax server uses an embedded tag, enter the tag in the Cover Page Via Embedded
Tag field. (Some fax servers use an embedded tag to indicate that a cover page is required.)
When a user requests a cover page, ShareScan adds the embedded tag string to the body of
the message.
Select the Address Books tab and then specify the settings (see Table 15 and see
5
Table 16).
Note:
This tab allows you to configure and enable the Lotus Notes Address Book and create,
configure, and enable a fax address book. All the fields are documented in the referenced
tables.
Select the Content tab and then specify the settings (see Table 10).
6
Select the Express tab and then specify the settings (see Table 11).
7
Click Save, select or specify the profile name, and then click Save.
8
®
eCopy ShareScan
Installation and Setup Guide
|
111
Advertisement
Table of Contents
