eCopy imageFORMULA ScanFront 220e Installation And Setup Manual page 114

|
106 Reference: Connector-specific configuration information
To configure eCopy Connector for Fax via Microsoft Exchange properties:
eCopy recommends that you use the Wizard to initially configure a connector profile. Use the
Properties button on the Configure tab only if you need to make custom modifications after the
initial configuration.
In the console tree, select Fax via Exchange > Properties.
1
Select the Display tab and then specify the settings (see Table 9).
2
Select the Configure tab.
3
The Configure tab displays a summary of the settings that you specify using the Wizard or
the Properties window (see page 96).
Use the connector Wizard to specify the basic settings (see Table 23).
4
This includes specifying the Fax Format (see page 73).
If you are configuring a connector profile for an environment that uses an External
5
Associated Account (EAA) and contains multiple forests, and you want to add additional
forests (see page 95).
Select the Local Address Book tab and then specify the settings (see Table 15 and see
6
Table 16).
Select the Content tab and then specify the settings (see Table 10).
7
Select the Express tab and then specify the settings (see Table 11).
8
Click Save, select or specify the profile name, and then click Save.
9
To configure eCopy Connector for Fax via Microsoft Exchange services:
In the console tree, select Fax via Exchange > Services.
1
The Services pane appears.
Configure the connector services (see page 80).
2
Click Save, select the profile name, and then click Save.
3