Installing And Removing Connectors - eCopy imageFORMULA ScanFront 220e Installation And Setup Manual

|
58 Reference: Common configuration information for connectors

Installing and removing connectors

During initial installation of the ShareScan software, you can install any of the eCopy Connectors
supplied on the installation CD (see page 9). To install a connector supplied with the ShareScan
installation CD that you did not install during the initial installation of ShareScan, you use the
Program Maintenance option. You access this option through the Add or Remove Programs
function in Control Panel or by running the ShareScan installation program again.
This topic also provides instructions on how to install connectors purchased separately and
supplied on their own CD. Depending on your version of ShareScan, you may also be able to
download connectors. For more information on downloading connectors please see the
instructions provided with your ShareScan CD.
To install a connector from the ShareScan CD after initial installation:
In Control Panel, select Add or Remove Programs.
1
Select eCopy ShareScan and then click Change.
2
The Wizard's Welcome window opens.
Click Next.
3
The Program Maintenance window opens.
Click Modify and then click Next.
4
The Connector Selection window opens.
Select the connectors that you want to install and then click Next.
5
Click Install and then follow the instructions.
6
To remove a connector supplied on the ShareScan CD:
In Control Panel, select Add or Remove Programs.
1
Select eCopy ShareScan and then click Change.
2
The Wizard's Welcome window opens.
Click Next.
3
The Program Maintenance window opens.
Click Modify and then click Next.
4
The Connector Selection window opens.
Select the connectors that you want to remove and then follow the instructions.
5