Network Infrastructure Worksheet; Table 56. Network Infrastructure Worksheet - eCopy imageFORMULA ScanFront 220e Installation And Setup Manual

Network infrastructure worksheet

Multiple domains and multiple workgroups are supported only if the Services Manager and all
eCopy-enabled devices are configured to communicate with one other via TCP or UDP, without
any port filtering or blocking.
Depending on the topology of the network, degradation in performance can occur when devices
span multiple domains. ShareScan supports child domains provided that the devices and the
Services Manager can communicate using an IP address. When devices cross domains, the system
checks to see whether the device can resolve the IP address by name. If it cannot resolve the
address, the device communicates using the IP address of the Services Manager.
Item
Workgroup or
domain-based
network?
Devices span single
or multiple domains?
Devices span single
or multiple
workgroups?
Microsoft Active
Directory installed?
Devices on different
subnets or VLANs?
Router configured to
pass packets
between subnets or
VLANs?

TABLE 56. Network infrastructure worksheet

Notes
eCopy recommends a single domain for
best performance.
eCopy recommends a single workgroup for
best performance.
Required on domain-based networks to
support remote access to the Services
Manager.
eCopy-enabled devices and the Services
Manager can be on different subnets or
virtual LANs (VLANs), provided that the
devices can communicate with the Services
Manager using an IP address.
Required when devices span multiple
subnets or VLANs.
®
eCopy ShareScan Installation and Setup Guide
Network
|
173
Example
Domain
Single domain
Not applicable
Yes
Yes
Yes