Steps
1. Go to Menu → Others → OSD .
2. Select More Settings.
3. Check LightInhibit.
Note
• If the function is enabled, the brightness of the strong spots can be reduced to improve the
overall images. If there are strong spots influencing the image effect in the environment,
enable the function.
• The supported image parameters vary with the models of positioning system. The actual
device prevails.
4. Select OK.
7.3 Set OSD Parameters
You can set the camera name, OSD (On Screen Display), etc.
Steps
1. Go to Menu → Others → OSD .
2. Select Camera.
3. Enter Camera Name, and select Date Format, Time Format, and Display Mode.
4. Check Display Name, Display Date, and Display Week as needed.
5. Optional: Select channel in Copy to and select Copy to copy above settings to the selected
channel.
6. Select OK.
7.4 Set Channel IP Address
You can change the IP address of added IP camera.
Steps
1. Go to Menu → Others → IPC .
2. Uncheck Auto Add.
3. Select Set of Manage IP Camera.
4. Select an added IP camera, and select Edit.
5. Edit its IP address and password.
6. Select OK.
Mobile Enforcement System User Manual
25