Set Alarm Output; Set Exception Alarm; Set Sensor-In - HIKVISION DS-MI9605-GA User Manual

6.2 Set Alarm Output

Configure the arming schedule, alarm duration time and alarm name for alarm output.
Before You Start
Connect an alarm output device to your recorder.
Steps
1. Go to Menu → Others → Alarm .
2. Select Alarm Type as Alarm Out.
3. Select Output No. according to actual situation.
4. Enter Alarm Name.
5. Select Duration.
Alarm output will keep for the set value.
6. Optional: Select the channel in Copy to and select Copy to copy above settings to the selected
channel.
7. Select OK.

6.3 Set Exception Alarm

Set alarms which are triggered by exceptions to take necessary actions in time.
Steps
1. Go to Menu → Others → Exception .
2. Select Exception Type as needed.
Note
• Select Illegal Login if you want to trigger alarm when the entered password is wrong.
• Select IP Conflicted if you want to trigger alarm when the recorder IP address duplicates with
others.
3. Select alarm linkage actions. For details, refer to "Set Linkage Actions".
4. Select OK.

6.4 Set Sensor-In

Sensor-in detects and records the driving information of the vehicle, including pedal braking,
turning left/right, reversing, etc.
Before You Start
Connect the sensor-in interface to vehicle corresponding interface. For details, refer to Quick Start
Guide.
Mobile Enforcement System User Manual
22