Table of Contents
Advertisement
2. Enter Image Partition.
3. Click Save.
10.6.3 Configure Overwritten Recording
You can enable overwritten recording if you want to overwrite the former record files when the
storage media is full. Or disable overwritten record if you want to stop recording when the storage
media is full.
Steps
1. Go to Configuration → Storage → Advanced Settings .
2. Check or uncheck Enable Overwriting according to your needs.
3. Click Save.
10.6.4 Print Log
If you need to debug the device, you can enable printing log.
Steps
1. Go to Configuration → Storage → Advanced Settings .
2. Check Enable Print Log.
3. Click Save.
10.6.5 Detect HDD
Check S.M.A.R.T. Information
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for
HDD to detect and report on various indicators of reliability in the hopes of anticipating failures.
Steps
1. Go to Configuration → Storage → Storage Management → HDD Detection .
2. Click S.M.A.R.T. Detection.
3. Select HDD No.
4. Select Self-test Type.
5. Click Start Self-test.
6. View the S.M.A.R.T. information in the table.
Caution
You can check Continue to use this disk when self-evaluation is failed. If you check it, the HDD
will be used continuously even when the S.M.A.R.T. detection is abnormal. It is risky to enable
the function. Check it with care.
Mobile Enforcement System User Manual
42
Advertisement
Table of Contents
