Table of Contents
Advertisement
Note
The device ID should be consistent with the registered ID on the EHome platform.
5. Optional: Check Net Self-Adaptive, Capture Upload, and Evidence Upload.
Net Self-Adaptive
To automatically optimize network transmission parameters according to network status.
Capture Upload
To automatically upload captured pictures to platform.
Evidence Upload
Reserved.
6. Select OK.
7. Optional: Go to Menu → Status → Platform to view platform connection status.
4.3 Configure Wi-Fi AP
The recorder can work as a wireless router. Other devices can access network via the recorder.
Steps
Caution
Wi-Fi AP and Wi-Fi conflicts with each other. You can only enable one.
1. Go to Menu → Network → Wi-Fi AP .
2. Check Enable Wi-Fi AP, Wi-Fi Broadcast and Wi-Fi Hotspot.
3. Set hotspot parameters.
1) Enter SSID (hotspot name).
2) Select Encryption.
4. Select >>> of More.
1) Enter IP Address and Subnet Mask.
2) Check DHCP, and enter an IP address from the address pool that allows automatic obtaining.
Note
IP address and TCP/IP address have to be in different network segments.
5. Select OK.
Mobile Enforcement System User Manual
18
Advertisement
Table of Contents
