Osd Settings; Event - HIKVISION DS-7700NI-Q4/16P Series User Manual

5.3.2 OSD Settings

Configure OSD (On-Screen Display) settings for the camera, including date format, camera name,
etc.
Steps
1. Go to Configuration → Camera → OSD.
2. Select a camera.
3. Set parameters as your desire.
4. Drag the text frames on the preview window to adjust the OSD position.
5. Click Apply.

5.3.3 Event

Motion Detection
Motion detection enables the video recorder to detect the moving objects in the monitored area
and trigger alarms. The device can analyze videos that contain human and vehicle, and discard
alarms which are not triggered by human or vehicle.
Steps
Note
If your device VCA Mode can be set as By NVR, this function would enabled by default. The
default detection area is full screen.
1. Go to Configuration → Camera → Event → Motion Detection.
Network Video Recorder User Manual
Figure 5-7 OSD
27