Table of Contents
Advertisement
Mobile Enforcement System User Manual
Detect Bad Sector
You can detect the bad sector of HDD to check the status.
Steps
1. Go to Configuration → Storage → Storage Management → HDD Detection .
2. Click Bad Sector Detection.
3. Select HDD No.
4. Select Test Type.
5. Click Start Detect.
The system starts to detect the HDD bad sector. You can view the HDD status on the interface.
6. Optional: Click Pause to pause the detection. Click Restore to restore the detection.
7. View the HDD information including HDD capacity, block capacity, status, and number of errors.
Result
Judge whether to use the HDD any more according to the detection result. If there are too many
bad sectors, change the HDD in time.
43
Advertisement
Table of Contents
