Default
Restore all parameters to the factory default settings.
9.6 Shutdown
9.6.1 Shutdown Delay
If you need the recorder to run for a while after the vehicle powers off, you can set shutdown
delay.
Steps
1. Go to Menu → Others → Startup .
2. Optional: Select UVP according to the power supply mode.
Note
• If you select Close, low voltage protection is disabled.
• When the recorder power voltage is lower than Battery Voltage, the recorder will shut down
automatically, no matter what type of startup/shutdown mode you selected.
3. Select Auto Work Type as Halt Delay.
4. Select Delay Time.
5. Select OK.
Result
After the vehicle powers off, the recorder will automatically shut down after the set delay time.
9.6.2 Timed Shutdown
Set the scheduled startup/shutdown. The recorder will automatically start up/shut down according
the schedule.
Before You Start
Wire power cord. For details, refer to "Quick Start Guide".
Steps
1. Go to Menu → Others → Startup .
2. Optional: Select UVP according to the power supply mode.
Note
• If you select Close, low voltage protection is disabled.
• When the recorder power voltage is lower than Battery Voltage, the recorder will shut down
automatically, no matter what type of startup/shutdown mode you selected.
Mobile Enforcement System User Manual
30