Set Indoor Station Network Parameters - HIKVISION DS-KH6320-TE1 Configuration Manual

3.3.1 Set Indoor Station Network Parameters

Network connection is mandatory for the use of the indoor station. Set the network parameters
after activating the indoor station. Only when the IP address of the indoor station is in the same
network segment as other devices, it can work properly in the same system.
Steps
Note
The default IP address of the indoor station is 192.0.0.64.
Two ways are available for you to set IP address: DHCP, and set IP address manually.
1. Tap Settings →
2. Tap to enter the network settings page.
3. Set the network parameters.
- Enable DHCP, and the system can assign an IP address of the indoor station automatically.
- Disable the DHCP function, and set the IP address manually. You should set the device IP
address, the gateway, the DNS address.
Network Indoor Station Configuration Guide
→ Configuration , and enter admin (activation) password.
Figure 3-17 Network Settings
16