Table of Contents
Advertisement
The positioning information will be uploaded according to the set interval.
8. Check the channel(s) you want the positioning information to be displayed.
The positioning information will be displayed in the live view and playback of the selected
channel(s).
9. Configure linkage actions.
• If you want the overspeed vehicle to trigger the speed alarm, check Trigger Alarm Output and
check the alarm output.
• If you want the overspeed vehicle to trigger the system to beep, check Audible Warning.
10. Click Save.
11. Optional: Click Location Status to view the positioning information.
10.4 Storage Management
10.4.1 Format Storage Media
A newly installed storage media must be initialized before it can be used.
Before You Start
Install a storage media.
Steps
1. Go to Configuration → Storage → Storage Management .
2. Check the storage media and click Format.
Result
After format, the storage media status should be Normal.
10.4.2 Configure Disaster Storage
The device will save videos in both storage media and mobile fireproof storage box to ensure data
security.
Before You Start
• Connect a mobile fireproof storage box to the device.
• Configure the recording schedule.
Steps
Note
The function is only available for the device supporting mobile fireproof storage box.
1. Go to Configuration → Vehicle → Storage For Calamity .
2. Check Enable.
Mobile Enforcement System User Manual
40
Advertisement
Table of Contents
