Table of Contents
Advertisement
2.1 View Camera Error Information
Camera error information of each channel can be accessed.
If exception occurs, camera error information of individual channel(s) will be provided on the
screen. Go to Camera → IP Camera, move the cursor to a window, and click
parameters of different channel(s).
2.2 Configure Image Parameters
You can customize image parameters, including day/night switch, backlight, contrast, and
saturation in Camera → Display.
Image Settings
Customize the image parameters including brightness, contrast, and saturation.
Exposure
Set the camera exposure time (1/10000 to 1 sec). A larger exposure value results in a brighter
image.
Day/Night Switch
Set the camera to day, night, or auto switch mode according to time or the surrounding
illumination condition. When the light diminishes at night, the camera can switches to night
mode with high quality black and white image.
Backlight
Set the camera's wide dynamic range (0 to 100). When the surrounding illumination and the
object have large differences in brightness, you can set the WDR value to balance the brightness
level of the whole image.
Image Enhancement
For optimized image contrast enhancement that reduces noise in video stream.
2.3 Configure OSD
You can configure the OSD (On-screen Display) for the camera, including date/time, camera name,
etc.
Steps
1. Go to Camera → Display.
Network Video Recorder User Manual
Chapter 2 Camera Settings
19
to edit the
Advertisement
Table of Contents
