Function Features; Technical Parameters - HIKVISION DS-K3BC411X Series Quick Start Manual

mark, the infrared sensor detects the complete process of the passenger passing through the
passage, and issues signal continuously to the main controller board, until the passenger passes
through the passage completely.
5) After the passenger passes through the passage completely, the main controller board
delivers a signal to the counter, which will increase 1 automatically, ending the passing process.
6) If the passenger forgets to swipe card when go into the passage, sound/light alarm signal
will be given from main board. The alarm signal will not be cancelled until the passenger retreats
from the passage and the passing is only allowed after reading again the effective card

1.3 Function Features


Varied pass mode can be chosen flexibly;

Standard signal input port, can be connected with most of the access control board,
fingerprint device and scanner other equipment;

The turnstile has automatic reset function, if people swipe the authorized card, but don't
pass through within the settled time, it need to swipe card again for entry;

Card-reading Recording function: single-directional or bi-directional access can be set by the
users

Automatic opening after emergency fire signal input

Pinch protection;

Anti-tailgating control technology

Automatic detection, diagnosis and alarm, sound and light alarm, including trespassing
alarm, anti-pinch alarm and anti-tailgating alarm.

High light LED indicator , displaying passing status.

Self diagnostic and alarm function for convenient maintenance and use

Gate will automatically open when power failure(connect 12V battery)
1.4 Technical parameter
Swing Barrier • User Manual
8