Set Time; Set Rs-232 - HIKVISION DS-MI9605-GA User Manual

3. Select Auto Work Type as Auto Working.
4. Select Date on which the recorder will start up/shut down automatically.
5. Specify Duration for the recorder to start up and shut down.
Note
Two periods of duration can be configured for each day and cannot overlap with each other.
6. Optional: Select date in Date Copy and select Copy to copy above settings to the selected date.
7. Select OK.
Result
The recorder will be on during the duration and off in other time.

9.7 Set Time

Set the recorder time.
Steps
1. Go to Menu → Others → Display .
2. Set System Time.
3. Select OK.

9.8 Set RS-232

If you want to debug the recorder via serial port, or connect an external device to the recorder, you
can set the RS-232 parameters.
Before You Start
Connect a device to the RS-232 serial port of the recorder.
Steps
1. Go to Menu → Others → Serial .
2. Select Serial Port.
Note
Ignore the step if your recorder has only one RS-232 interface.
3. Select Baud Rate, Data Bit, Stop Bit, etc.
4. Select Work Mode.
Transparent
Used for external devices.
Console
Used for debugging.
Mobile Enforcement System User Manual
31