Debug Interface
Used to debug recorder.
Rear Interface
Used to connect to IP camera.
Note
Some models do not support NIC Type. The actual recorder prevails.
3. Enter IP Address, Subnet Mask, and Default Gateway.
4. Select OK.
4.2 Connect to EHome Platform
You can connect the recorder to the EHome platform for central management.
Before You Start
• Create the recorder ID on EHome platform.
• Ensure the recorder can communicate with the platform normally.
Steps
1. Go to Menu → Platform .
2. Select Current Platform as Ehome Platform.
3. Check Enable Current Platform.
4. Enter Server IP, Port No., and Device ID.
Mobile Enforcement System User Manual
Figure 4-2 Connect to EHome Platform
17