Connect To Smart Terminal; Set Touchscreen Parameters - HIKVISION DS-MI9605-GA User Manual

Mobile Enforcement System User Manual
5. Select OK.

9.9 Connect to Smart Terminal

For the recorder supporting network camera, when the recorder and a smart terminal connect to
the same network camera, and the smart terminal is added to the recorder, the recorder will
receive driving behavior analysis from the smart terminal.
Before You Start
Add the same network camera to both smart terminal and recorder.
Steps
1. Go to Menu → Others → Smart Terminal .
Figure 9-1 Connect to Smart Terminal
2. Check Enable.
3. Enter smart terminal information.
4. Select OK.

9.10 Set Touchscreen Parameters

You can operate recorder via the connected touchscreen. Set touchscreen parameters.
Steps
1. Go to Menu → Enforcement → Touchscreen .
2. Select Sensitivity.
3. Check Multi-touch Gesture.
4. Select Multi-touch Upward, Multi-touch Downward, Multi-touch Leftward, and Multi-touch
Rightward.
32