Fan Belt Removal/Installation; A/C Belt Removal/Installation - Terex ASV SR70 Service & Repair Manual

Fan Belt Removal & Installation
To remove the fan belt:
1. Follow steps 1 and 2 of the belt adjustment proce
dure.
2. Once loose, pivot the alternator towards the
engine to increase slack.
3. Then, remove the three bolts securing the fan
cage (half) to the fan shroud. Remove that portion
of the cage. (fig. 4-45, 4-46)
4. Slip the belt off of the engine pulleys and work it
around the fan until it is clear of the blades.
To install the fan belt:
1. Reverse the steps of the removal procedure.
2. Perform the belt tension check and adjustment
procedures on page 4-12 to complete the
installation.
A/C Belt Removal & Installation
To remove the A/C belt:
1. Follow steps 1 and 2 of the belt adjustment proce
dure.
2. Once loose, pivot the A/C pump towards the
engine to increase slack.
3. Slip the belt off of the pulleys and remove
it from the machine.
To install the A/C belt:
1. Reverse the steps of the removal procedure to
reinstall the belt.
2. Perform the belt tension check and adjustment
procedures on page 4-12 to complete the
installation.
4-44
4-45
4-46
4-13
https://tractormanualz.com/
Rubber Track Loader
4. Maintenance
Pry-bar
Bolt
1/2 cage
Bolt
Bolts