Hydraulic Reservoir; Chapter Overview; Personal Safety; Machine Preparation - Terex ASV SR70 Service & Repair Manual

Table of Contents

Chapter Overview

This chapter provides removal and installation proce-

dures for the hydraulic reservoir.

Personal Safety

!WARNING!

Improper or incomplete maintenance/repair of a Rubber

Track Loader can be dangerous and may result in

machine damage, injury or even death.

Do not attempt to perform any type of repair or mainte-

nance on a Rubber Track Loader until you have read and

fully understood the information in this manual.

Refer to the Operation and Maintenance manual for

instructions regarding proper machine operation tech-

niques before operating any Rubber Track Loader.

Machine Preparation

!WARNING!

Accidental machine starting can cause injury or even

death to personnel working on a Rubber Track Loader.

As a precaution, disconnect the battery cables from the

battery terminals, tape the battery clamps and remove

the key from the ignition switch prior to performing any

service work on a Rubber Track Loader.

Place a "Do Not Operate" tag prominently on the ma-

chine to inform personnel that the machine is being

worked on.

Prior to performing any type of service work on a

Rubber Track Loader, read and understand Chapter 1

(Product Safety) for personal safety information.

Removal and Installation

Removal and installation procedures are provided for

the following hydraulic components.

•

Hydraulic Reservoir (tank)

•

Suction Screen

Note: Procedures are provided for only those hydraulic com-

ponents listed above. However, exploded parts diagrams

exist in the SR-70 and SR-80 Parts manuals to serve as

visual aids in the removal and installation of other system

components.

Note: Refer to pages 3-1, 3-2 and 3-3 for additional

hydraulic circuit and system information.