Fuel Tank - Terex ASV SR70 Service & Repair Manual

Rubber Track Loader
7. Chassis and Fuel Tank
Remove Screws
7-2
5. Remove the screws securing the fuel sending unit
to the tank. (fig. 7-2)
7-3
6. Remove the sending unit by pulling it through the
opening in the fuel tank. (fig. 7-3)
Installation
1. To install the fuel sending unit, reverse the removal
procedure. (See fig. 7-4 for terminal installation)
-- Neg
+ Pos
7-4

Fuel Tank

Removal
Required Tools
Screwdriver
Combination/Socket Wrench
1. Raise and support the lift arms as described on
2. Tilt and support the operator enclosure (cab) as
3. Loosen the hose clamps securing the vent hoses
4. Disconnect and plug the hoses. (fig. 7-6)
Install First
Install Last
5. Remove the bolts securing the forward belly pan
7-2
https://tractormanualz.com/
page 4-1 of this manual.
described on page 4-2 of this manual. (optional)
7-5
to the left rear tank end. (fig. 7-5)
7-6
7-7
and remove it from the machine. (fig. 7-7)