Removal Procedure; Engine - Terex ASV SR70 Service & Repair Manual

12-18
4. Remove the air cleaner housing from the machine.
(fig. 12-18)
Installation
1. To install the air cleaner assembly, reverse the

removal procedure.

Engine

Removal
Required Tools
Combination/Socket Wrenches
Angle Iron or Similar (approx. 43" long)
Tie Down or Ratchet Strap
Forklift/Engine Hoist
Pry Bar
1. Perform the battery, air cleaner, and charge pump,
removal procedures in sections 11 and 12 of this
manual prior to starting this procedure.
2. Remove the hood assembly as described on page
7-5 of this manual.
3. Raise and support the operator enclosure (cab) as
described on page 4-2 of this manual.
4. Perform steps 2-7 of the exhaust removal proce-
dure on page 12-2 of this manual.
5. Remove the center belly pan from the machine.
12-19
6. Remove the front motor mount bolts (2) from the
machine. (fig. 12-19)
12-20
7. Remove the rear motor mount bolts (2) from the
machine. (fig. 12-20)
12-5
https://tractormanualz.com/
Rubber Track Loader
12. Engine