Terex ASV SR70 Service & Repair Manual page 85

Rubber Track Loader
12. Engine
Cable
12-21
8. Disconnect the throttle cable from the engine.
Note: Once loose, you may want to pull the throttle
cable forward through the chassis to make sure it is
clear of the engine during removal.
Wire Harness
Restraint
12-22
9. Disconnect the cable restraints holding the wire
harness to the lower chassis crossmember.
(fig. 12-22)
12-23
10. Disconnect the wire harness connections in the
upper right hand portion of the engine compart-
ment. (when viewed from the rear) (fig. 12-23)
Ballstud
Restraint
Rear Axle
12-6
https://tractormanualz.com/
Bolts
12-24
11. Disconnect the case drain filter and bracket from
the engine adapter plate and lay it aside. It is situ-
ated beneath the drive pump. (fig. 12-24)
12-25
12. Remove the two bolts securing the drive pump to
the engine adapter plate. (fig. 12-25)
12-26
13. Loosen and disconnect the fuel lines (2) from the
engine. (fig. 12-26)
Engine
Bolts