Seat; Removal Procedure; Interior Side Panel, Lt - Terex ASV SR70 Service & Repair Manual

Rubber Track Loader
6. Operator Enclosure

Seat

Removal
Required Tools
Combination/Socket Wrench
6-15
1. Remove the bolts (2) securing the cab to the chas-
sis. They are located inside the cab in the upper
front corners of the foot well. (fig. 6-15)
2. Raise and secure the cab as described on page 4-
2 of this manual.
6-16
3. Remove the four nuts securing the seat to the cab.
6-17
4. Remove the seat partially to expose the seat
switch harness located behind the seat. (fig. 6-17)
6-18
5. Disconnect the harness and then remove the seat
from the machine. (fig. 6-18)
Seat
Installation
1. To install the seat, reverse the removal procedure.

Interior Side Panel, LT

Removal
Required Tools
Phillips Type Screwdriver
6-19
1. Remove the mounting screws (5) and washers
securing the panel to the chassis. (fig. 6-19)
6-20
2. Remove the cup holder mounting screws (4) and
remove the cup holder from the panel. (fig. 6-20)
6-4
https://tractormanualz.com/