Table of Contents
Advertisement
P.9
CAUTION
Do not step on the pump, otherwise falling or turnover may be caused. Do not place anything on
the pump as it may damage the product.
Do not lift the pump by your self. Lift the pump by hand with two (2) persons.
Do not use sling or the like to lift the pump as the handles are not designed to be used with slings.
Use high corrosion-resistant materials for pipes and parts used on both inlet port and outlet port
sides.
Pump starts operation as soon as power is supplied if pump run command presents.
Take safety precautions and make sure pump inlet and outlet are plumbed properly before
supplying power.
Use lubricant oil specified on P.18 (3.4. Product specification) section.
Do not overfill more than upper limit as it may damage the product.
Refill oil immediately when oil level is low as it may cause severe damages to the product.
EBARA
CORPORATION
PM10U
Advertisement
Table of Contents
