Ide Configuration - IEI Technology DRPC-120-BTi User Manual

5.3.7 IDE Configuration

Use the IDE Configuration menu (BIOS Menu 11) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Advanced
IDE Configuration
Serial-ATA (SATA)
SATA Mode
SATA Port1
Not Present
SATA Port2
Not Present
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
BIOS Menu 11: IDE Configuration

Serial-ATA (SATA) [Enabled]
Use the Serial-ATA (SATA) option to enable or disable the serial ATA port.

Enabled

Disabled

SATA Mode [IDE Mode]
Use the SATA Mode option to configure SATA devices as normal IDE devices.

IDE Mode

AHCI Mode
Page 64
DRPC-120-BTi Embedded System
[Enabled]
[IDE Mode]
D Enables the SATA port.
EFAULT
Disables the SATA port.
D Configures SATA devices as normal IDE device.
EFAULT
Configures SATA devices as AHCI device.
Select IDE / AHCI
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit