Ide Configuration - IEI Technology DRPC-100 User Manual


Hyper-Threading [Enabled]
Use the Hyper-Threading function to enable or disable the Intel Hyper-Threading
Technology.

Disabled

Enabled

5.3.3 IDE Configuration

Use the IDE Configuration menu (BIOS Menu 5) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0
SATA Port1
Configure SATA as
SATA Port 0 Hot Plug
SATA Port 1 Hot Plug
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 5: IDE Configuration

Configure SATA as [AHCI]
Use the Configure SATA as option to configure SATA devices as normal IDE or AHCI
devices.

IDE

AHCI D
EFAULT
Page 48
Disables the Intel Hyper-Threading Technology.
D Enables the Intel Hyper-Threading Technology.
EFAULT
Not Present
IEI Technology (4.2GB
[AHCI]
[Enabled]
[Enabled]
Configures SATA devices as normal IDE device.
Configures SATA devices as AHCI device.
DRPC-100 Embedded System
Select a configuration
for SATA Controller.
---------------------
: Select Screen
 : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit