Ide Configuration; Bios Menu 10: Ide Configuration; Serial-Ata (Sata) [Enabled] - IEI Technology AFL3-12A/W15A-BT User Manual

4.3.7 IDE Configuration

Use the IDE Configuration menu (BIOS Menu 10) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Advanced
IDE Configuration
Serial-ATA(SATA)
SATA Mode
SATA1
Not Present
SATA2
Not Present
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.

BIOS Menu 10: IDE Configuration



Serial-ATA (SATA) [Enabled]

Use the Serial-ATA (SATA) option to enable or disable the serial ATA controller.

Enabled

Disabled

SATA Mode [IDE Mode]
Use the SATA Mode option to configure SATA devices as normal IDE devices.

IDE Mode

AHCI Mode
Page 64
[Enabled]
[IDE mode]
Enables the on-board SATA controller.
D
EFAULT
Disables the on-board SATA controller.
Configures SATA devices as normal IDE device.
D
EFAULT
Configures SATA devices as AHCI device.
AFL3-12A/W15A-BT Panel PC
Enable/Disable Serial
ATA
---------------------
: Select Screen
 : Select Item
Enter Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit