System Maintenance Introduction; Motherboard Replacement - IEI Technology DRPC-120-BTi User Manual

4.1 System Maintenance Introduction

The following system components may require maintenance.

Motherboard

SO-DIMM module
If these components fail, they must be replaced. Please contact the system reseller or
vendor to purchase replacement parts. Replacement instructions for the above listed
components are described below.
WARNING!
Before accessing any DRPC-120-BTi internal components, make sure
all power to the system has been disconnected. Failing to do so may
cause severe damage to the DRPC-120-BTi and injury to the user.
WARNING!
Please take antistatic precautions when working with the internal
components. The interior of the DRPC-120-BTi contains very sensitive
electronic components. These components are easily damaged by
electrostatic discharge (ESD). Before working with the internal
components, make sure all anti-static precautions described earlier
have been observed.

4.2 Motherboard Replacement

A user cannot replace a motherboard. If the motherboard fails it must be shipped back to
IEI to be replaced. If the system motherboard has failed, please contact the system
vendor, reseller or an IEI sales person directly.
Page 38
DRPC-120-BTi Embedded System