Ide Configuration; Bios Menu 10: Ide Configuration; Serial-Ata (Sata) [Enabled]; Sata Mode [Ide Mode] - IEI Technology IVS-300 User Manual

4.3.6 IDE Configuration

Use the IDE Configuration menu (
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Advanced
IDE Configuration
Serial-ATA (SATA)
SATA Mode
SATA Port1
SATA Port2
Version 2.17.1245. Copyright (C) 2016 American Megatrends, Inc.

BIOS Menu 10: IDE Configuration



Serial-ATA (SATA) [Enabled]

Use the Serial-ATA (SATA) option to configure the SATA controller.

Enabled

Disabled


SATA Mode [IDE Mode]

Use the SATA Mode option to configure SATA devices as normal IDE or AHCI devices.

IDE Mode

AHCI Mode
Page 58
B IOS Menu 10) to change and/or set the configuration
3
[Enabled]
[IDE Mode]
Empty
Empty
Enables the on-board SATA controller.
D
EFAULT
Disables the on-board SATA controller.
Configures SATA devices as normal IDE device.
D
EFAULT
Configures SATA devices as AHCI device.
IVS-300 Embedded System
Enable / Disable Serial ATA
---------------------
: Select Screen
 : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit