Table of Contents
Advertisement
DRPC-120-BTi Embedded System
3.4 mSATA SSD Installation
The DRPC-120-BTi has one full-size PCIe Mini slot on the motherboard for mSATA SSD
installation. To install the mSATA SSD, follow the instructions below.
Step 1:
Remove the internal access panel from the DRPC-120-BTi. Please follow the
instruction described in Section 3.2.
Step 2:
Locate the PCIe Mini slot on the motherboard (Figure 3-3).
Figure 3-3: PCIe Mini Slot Location
Step 3:
Insert into the socket at an angle. Line up the notch on the card with the notch
on the connector. Slide the PCIe Mini card into the socket at an angle of about
20º (Figure 3-4).
Page 19
Advertisement
Table of Contents
