Ide Configuration - IEI Technology TANK-800 User Manual

Hyper-Threading: Indicates if the Intel Hyper-Threading Technology is
supported by the CPU.
Hyper-Threading [Enabled]
Use the Hyper-Threading BIOS option to enable or disable the Intel Hyper-Threading
Technology.
Disabled
Enabled

4.3.3 IDE Configuration

Use the IDE Configuration menu (BIOS Menu 5) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
PATA Master
PATA Slave
SATA Port0
SATA Port1
SATA Port2
SATA Port3
ATA/IDE Configuration
Configure SATA as
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 5: IDE Configuration
ATA/IDE Configuration [Enhanced]
Use the ATA/IDE Configuration option to configure the ATA/IDE controller.
Disabled
Page 50
Disables the Intel Hyper-Threading Technology.
Enables the Intel Hyper-Threading Technology.
D
EFAULT
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
[Enhanced]
[IDE]
Disables the on-board ATA/IDE controller.
TANK-800 Embedded System
Select ATA or IDE
Configuration.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit