Ide Configuration - IEI Technology UPC-V312-D525 User Manual

Use the Hyper Threading function to enable or disable the CPU hyper threading function.
Disabled
Enabled

4.3.3 IDE Configuration

Use the IDE Configuration menu (BIOS Menu 5) to change and/or set the configuration
of the IDE or SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
PATA Slave
ATA/IDE Configuration
Legacy IDE Channels
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 5: IDE Configuration
ATA/IDE Configurations [Compatible]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.
Disabled
Compatible
Page 58
Disables the use of hyper threading technology
Enables the use of hyper threading technology
D
EFAULT
No Present
[Compatible]
[PATA Only]
Disables the on-board ATA/IDE controller.
Configures the on-board ATA/IDE controller to be in
D
EFAULT
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.
UPC-V312-D525 Panel PC
Select ATA/IDE
Configuration
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save
ESC Exit