Sata Configuration; Bios Menu 13: Ide Configuration; Sata Mode Selection [Ahci]; Hot Plug [Disabled] - IEI Technology ITG-100AI User Manual


Disabled

Enabled

4.3.9 SATA Configuration

Use the SATA Configuration menu (BIOS Menu 13) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Advanced
SATA Configuration
SATA Mode Selection
SATA Port0
Hot Plug
mSATA Port
Hot Plug
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.

BIOS Menu 13: IDE Configuration

SATA Mode Selection [AHCI]


Use the SATA Mode Selection option to configure SATA devices as normal IDE devices.

AHCI

Hot Plug [Disabled]


Use the Hot Plug option to configure the port as Hot Pluggable.

Disabled

Enabled
Page 42
D Disabled the auto recovery function
EFAULT
Enabled the auto recovery function
[ACHI]
SATADOM-SH 3ME (32.0GB)
[Disabled]
Not Present
[Disabled]
D Configures SATA devices as AHCI device.
EFAULT
D Disables the port as Hot Pluggable.
EFAULT
Enables the port as Hot Pluggable.
ITG-100AI Embedded System
Determines how SATA
controller(s) operate.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit