The Touch Screen Or The [Power] Button Light Or Both Switch Off - Fujitsu PA03768-B005 Operator's Manual

The Touch Screen or the [Power] Button Light or Both Switch Off

Check the following points
● Has the scanner been left out of operation for a long time after being powered on? (page 165)
If the problem persists, check the items in
first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
●
Has the scanner been left out of operation for a long time after being powered on?
Solution
The scanner has entered power saving mode or has been automatically turned off.
● If the scanner has entered power saving mode
The touch screen turns off and the [Power] button flashes in green.
Resume from power saving mode by one of the following methods:
- Load a document in the ADF paper chute (feeder).
- Press the touch screen.
- Scans a document with the image scanning application.
For details, refer to
● If the scanner has been automatically turned off
The touch screen and the [Power] button light are off.
Turn on the scanner.
For details, refer to
Before You Contact the Scanner Service Provider (page 217)
Entering and Resuming from Power Saving Mode (page
How to Turn the Power ON (page
165
61).
56).
Troubleshooting