Configuring Not To Detect Certain Overlap Patterns - Fujitsu PA03768-B005 Operator's Manual

Configuring Not to Detect Certain Overlap Patterns

If detecting overlapped documents during a scan is set, when you scan a document with a paper attachment
such as a sticky note, receipt, or photo, it is detected as overlapped documents, and the scan may stop. Use the
intelligent multifeed detection function not to detect these types of documents.
This function has two modes, a mode that is used to configure the settings manually by a user every time the
scanner detects overlapped documents, and a mode that is used to configure the settings automatically by the
scanner based on the overlap patterns (length and location) for paper attachments such as sticky notes,
receipts, or photos that the scanner has memorized.
To use this setting, detecting overlapped documents needs to be set in advance.
● [Multifeed Detection] in the scanner driver
For details, refer to the help for the scanner driver.
● [Multifeed Detection] on the touch screen or [Multifeed] on the Software Operation Panel
For details about the settings on the touch screen, refer to
For details about the settings on the Software Operation Panel, refer to
Overlapped Documents [Multifeed] (page
The following three operation modes are available.
Operation mode
Manually Bypass
Automatically Bypass (combination of
length and position)
Automatically Bypass (length)
Select an operation mode in the [Intelligent Multifeed Detection] screen on the touch screen.
The [Intelligent Multifeed Detection] screen can be displayed in the following procedure.
→ [Scanner Settings] → [Paper Source/Feeding] → [Intelligent Multifeed Detection]
Multifeed Detection (page
290).
Description
Specify whether or not to detect overlapped documents every
time they are detected.
Specify the setting not to automatically detect overlapped
documents when the paper attachment is the same length and
in the same location as memorized.
Specify the setting not to automatically detect overlapped
documents when the paper attachment is the same length or
shorter as memorized.
109
Various Ways to Scan
232).
Specifying a Method to Detect