Connection Test Result - Fujitsu PA03768-B005 Operator's Manual

Connection Test Result

●
"0% packet loss" shown in the test result
Meaning
The communication with the host specified in [Host Name/IP address] is normal.
●
"100% packet loss" shown in the test result
Meaning
Failed to communicate with the destination specified in [Host Name/IP address].
Solution
[Host Name/IP address] may not be specified correctly. Make sure that the host name or the IP address is
specified correctly.
If the problem persists, refer to the following section in
The Connection Between the Scanner and Computer Frequently Cuts Off (page 183)
●
Cannot Connect the Scanner to a Destination by Specifying an IP Address (page 190)
●
● Cannot Connect the Scanner to a Destination by Specifying a Host Name (page 192)
●
"99% packet loss" shown in the test result
Meaning
Communication with the destination specified in [Host Name/IP address] is unstable.
Solution
Refer to Cannot Connect the Scanner and a Computer via Wi-Fi (page 169)
Scanner and a Computer via a Wired LAN (page
●
"ping: bad address" shown in the test result
Meaning
The name-resolution or address-resolution for the destination specified in [Host Name/IP address] may
have failed.
Solution
● Make sure that [Host Name/IP address] is specified correctly.
● Make sure that the DNS server settings are correct.
● If [Host Name/IP address] is specified correctly, refer to
Specifying a Host Name (page 192)
● Refer to Cannot Connect the Scanner and a Computer via Wi-Fi (page 169)
Scanner and a Computer via a Wired LAN (page
Troubleshooting (page
184), and take measures accordingly.
Cannot Connect the Scanner to a Destination by
for further solutions.
184), and take measures accordingly.
161
Troubleshooting
162):
and Cannot Connect the
and Cannot Connect the