Feed Mode Switched; Sensor(S) Dirty - Fujitsu PA03768-B005 Operator's Manual

Image scanner
Table of Contents

Advertisement

Press the [Eject Document] button to eject the document.
J2:56 Multifeed detected (Length)
Press the [Eject Document] button to eject the document.
If documents remain in the scanner, remove the documents by referring to
142).
If documents are overlapped and fed into the scanner frequently, take measures according to
Documents Are Frequently Fed into the Scanner (page
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.

Feed Mode Switched

When the feed mode is switched during scanning, the [Error] screen on the touch screen displays the following
code.
J7:5F Feed mode switched
Check the feed mode switch setting, reload the documents and try again.
Check the position of the feed mode switch.
If documents remain in the ADF, remove the documents by referring to
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.

Sensor(s) dirty

If a sensor is dirty, the [Error] screen on the touch screen displays one of the following codes.
J8:01 Sensor(s) dirty
Clean the Pick Sensor.
J8:04 Sensor(s) dirty
Clean the READ-TOP Sensor.
Take the following measures.
● Clean the document sensors by referring to
● Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.
202).
When a Paper Jam Occurs (page
Cleaning the Inside of the Scanner (ADF) with a Cloth (page
148
Troubleshooting
When a Paper Jam Occurs (page
Overlapped
142).
121).

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Fi-7300nx

Table of Contents