Conditions For Mixed Batch Scanning - Fujitsu PA03768-B005 Operator's Manual

Conditions for Mixed Batch Scanning

The following conditions apply when a mixed batch of documents with different paper weights/friction
coefficients/sizes is scanned.
Make sure to test a few sheets first to check if the mixed batch of documents can be fed.
Paper Direction
Align the direction of the paper fiber with the feed direction.
Paper Weight (Thickness)
Documents with the following paper weights can be scanned when scanning a mixed batch of documents
with different paper weights:
2
27 to 413 g/m
Friction Coefficient
It is recommended that the same paper brand from the same manufacturer is used for documents.
When different paper manufacturers/brands are mixed in documents to be scanned, it affects the feeding
performance as the difference in friction coefficient increases.
The following friction coefficients are recommended:
0.35 to 0.60 (reference value for paper friction coefficient)
Document Position
Load all documents covering the width of the pick roller.
For a guideline for mixed batch scanning, refer to
(page 91) in Paper Size (page
(7.2 to 110 lb)
90).
Combinations of Standard Paper Sizes in a Mixed Batch
89
How to Load Documents