Fujitsu PA03768-B005 Operator's Manual page 104

● When [Automatic] is specified for [Paper Size] in the scanner driver, the most suitable size is selected from
standard sizes which can be specified for [Paper Size]. Note that the size of the image may become smaller
than the original document depending on the document scanned, or part of the image may appear missing.
Example
When an A5 size image is printed in the center of an A4 size document
→ The image is output in A5 size.
To output the scanned image in the actual size of the document, specify the document size for [Paper size].
HINT
In the following cases, place a blank (white) sheet of paper behind the document when scanning.
● The scanned image is not output in the actual size of the document when [Automatic] is specified for [Paper
size] in the scanner driver.
● Shadows appear around the edges of the scanned image.
● Black lines appear around the edges of a uniquely shaped cutting.
● Image outside the document appears on the scanned image.
104
Various Ways to Scan